The single-format machine Beumer stretch hood S has been developed as an alternative to the multi-format machine Beumer stretch hood and can be used especially for packaging of same stack dimensions with a maximum height of 240 cm. When comparing the thermal shrink packaging vs. the stretch hood method, the Beumer stretch hood offers considerable and decisive advantages:
- Valuable goods are better protected against soiling, moisture and stress during transport.
- The high vertical stretch and the fixing of the film to the pallet, i.e. the base stretch, guarantee the stability of the load and the safe transport from the manufacturer to the final customer.
- Because of the optimum stretch hood welding seam the stack load has a perfectly smooth and non-perforated surface with the often requested display feature.
The configuration of the Beumer stretch hood is modular and can be tailored to the individual project requirements. The corners of pallets with sharp-edged goods can be especially strengthened with film and also pallets for high stacking storing can be made without the base stretch. For special securing of stacked unit loads sleeves of film can be placed at any height of the unit load.
cpp 414
Share: