The Pallmann ConoMill type PLK is used for pulverising, mixing, homogenising, coating and defiberising of various materials. Possible materials are, for example pigments, paints and resins as well as pharmaceutical products, sugar and spices. There are various ways to dose the feed material into the mill according to the requirements, such as vibratory feeder, feed screw or a rotary air lock.
The rotor is aligned vertically and together with the stator they form a cone-shaped grinding chamber. This geometrical arrangement allows the grinding gap to be easily set by raising or lowering the stator. Size reduction or conditioning occurs between the impact edge of the rotor and the wear resistant grinding path. The degree of fineness or conditioning is controlled by the grinding gap, circumferential speed of the impact edge of the rotor, volume of air, rotor type as well. Very often there is no requirement for a sifter to control the upper particle size. A blower sucks the product out of the mill and into either a cyclone or filter separator.
Upon product change or exchange of the rotor, the upper side of the monoblock housing is easily lifted by means of an electric gear motor. Afterwards it is swivelled to the side and turned 180° around its horizontal axle. The grinding chamber and the conical rotor are now easy to access, clean or to exchange.
Hall 7, Booth 547
Online-Info www.cpp-net.com/2110408
Share:
