Anyone who has to calibrate intrinsically safe pressure transmitters on site in a plant obviously needs test equipment that is approved for use in hazardous...
Archive - April 2020
Manufacturing of suppositories requires reliable transfer of the viscous mass from the preparation tank to the moulding plant and back in a low pulsation...
Radar technology has established itself as a real problem solver in the field of level measurement. So far, however, the price of the devices has prevented...
Quintessential explosion protection requires comprehensive expertise of various types of protection especially with the increase of highly networked switching...
In industrial plants, PLCs run the show. The chemical giant, BASF, has a large number of PLCs that needed to be automatically updated. But with multiple...
The Type 3598 cryogenic valve by Samson was carefully tailor-made for use at cryogenic temperatures, high operating pressures and high pressure drops:...
Using advanced, precise, in-house technology, the German manufacturer Rembe has developed a performance-improved range of rupture discs. CPX rupture discs...
The chemical industry is preparing to tap further optimisation potential for its production processes by implementing various concepts from Industry 4.0. This...
For businesses that rely on refrigeration dryers for their compressed air treatment, there will be no getting around the new F-Gas Regulation. This new...
Julabo circulators are renowned for their reliable technology. Now, the new Magio series complements the product range with bridge mounted circulators...
The energy efficiency target presented by the German government in December 2019 provides for a 30 % reduction in primary energy consumption compared to 2008...
In the April issue of cpp, the emphasis is normally on pre-fair reports linked to the Hannover Messe, which takes place every year around this time. A...
Lithium-ion batteries are an integral part of everyday life and, with good manufacturing standards and proper handling, are also a sufficiently safe...
The screw compressor VM 100 from Aerzen is designed for a volume flow range from 1500 to 7620 m3/h and covers a maximum differential pressure of...
The HST 30 high-speed turbocompressor from Sulzer offers more flow and pressure at a higher efficiency than its predecessors. This translates into savings in...
The form fill seal system Fillpac FFS forms bags from a prefabricated tubular PE film and fills them with the product. The customers can select the optimal...
The pail filling station type 14 from Feige Filling uses the Feige weighing technology to fill cans, pails or canisters with liquid or pasty products in a...
Emerson has introduced a range of Rosemount solids level switches designed to optimise operations, increase safety and reduce waste. The vibrating fork...
Due to the increasing spread of the coronavirus (Covid-19) in
Europe and based on the re-commendations of the German
Ministry of Health and the Bavarian State...
Gericke’s tare-compensated hybrid loss-in-weight feeders are well known for their combination of high accuracy feeding and robustness. The DIW-E-Star...
Lewa has developed an app that presents a virtual, freely scalable ecoflow process diaphragm pump on an iPad and allows malfunctions to be simulated. This...
The Profox from Auma is not only cunning and adaptable but also extremely hardy. The smart actuators are suitable for process and water applications...
The facelift of the IE3 asynchronous motors from Nord Drivesystems involves no change of electrical data and outer dimensions. They can be seamlessly used...
A new hardware and software platform is being used in the Jumo Varitron 500 central processing unit. During its development, scalability had the...
The Isfet sensors made of unbreakable Peek from Endress+Hauser offer high product safety, accuracy and improved CIP stability. The sensors made of unbreakable...
Neste, provider of renewable diesel, renewable jet fuel, and an expert in delivering drop-in renewable chemical solutions, and Ravago, distributor and recycler...
Proview process data visualisation from Eirich is a universal tool that is not tied to any specific platform, enabling efficient analysis of operating data. It...
For the extractive analysis of process and emission gases the reliable and constant reduction of the sample gas moisture is indispensable. The solution for...
The Keller D-line boasts a combination of highly robust industrial pressure transducers and the I2C interface. This series has undergone further development...
The ultrasonic clamp-on flowmeters and energy meters TFX-5000 are available in two versions:
a flowmeter for water delivery, raw sewage, cooling water, sea...
Phoenix Contact has expanded the application range of its PRC plastic circular connectors with pre-assembled power distributors. The distributor boxes are...
The Dulcodos Safe-IBC from Prominent is a special metering and drainage station for Intermediate Bulk Containers (IBC) with almost complete residual drainage...
Larson Electronics, released an explosion proof thermostat rated for use in Class I, Divisions 1 and 2 hazardous locations. This thermostat is ideal for...
The drum emptying system with follower plate from Lutz is supplied on a mobile trolley. A simple and convenient control system enables the commissioning. The...
Beginning with the next financial year, the size of the Executive Board at industrial services provider Bilfinger will be reduced from four to three...
Edwards Vacuums developed the Elri series of liquid ring pumps for applications which are wet, humid as well as corrosive. The stainless steel impeller...
The continuous Ploughshare mixers of the KM series are particularly suitable for environmental engineering applications. This low-maintenance mixer model is...
To meet growing demands for modular systems, Wago added the “Module Type Package” (MTP) to its range of automation solutions. Similar to printer drivers...
The modular OC200 orbital cleaner from GEA offers distinctive advantages in terms of cleaning performance and efficiency. The orbital cleaner’s normal...
The Amarex KRT range of submersible motor pumps are available with drive ratings of 10 to 30 kW and are suitable for vertical or horizontal dry...
Pepperl+Fuchs is now offering more and more customised solutions for zones 1 and 21 that feature sensor technology from factory automation and can be used in a...
Wacker Chemie AG’s Supervisory Board re-appointed Chief Financial Officer Dr. Tobias Ohler (49) to the Executive Board for another five years. Ohler’s...
With numerous innovations, Siemens is extending its drive portfolio, improving user-friendliness and offering space-saving installation options. The Sinamics...
WS Sanitary housings from Wolftechnik are designed for use in sterile production. Depending on the product requirements, depth filter types can be used in the...
Gemü has expanded its selection of motorised valves with the launch of the Gemü Esystep and Esydrive valves.The Gemü Esystep valves are designed for...
Wika's PSD-4-ECO programmable pressure switch enables pressure monitoring in machines which is as uncomplicated as it is reliable. With IO-Link version 1.1...
The quick couplings of the Clean-Break CN series from Walther Präzision meet the requirements of the directive
RL 2010/35/EU on transportable pressure...
Valve islands in process automation have, step by step, become an integral part of process engineering plants. Now Bürkert is taking the next step: Seamless...
Asset management and predictive maintenance on the basis of data stored in the Auma Cloud. This is Auma‘s way to increase actuator availability. Thomas...